Sorry to ask this but.
I have an orange wamp icon.
mysql is running, but apache not
I have several errors in the windows application log files.
I had them before and rebooted.
now I see the same kind of errors:
1)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
2)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1a84
Start time of application with error: 0x01d1c3b8d13c31f6
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 501a41fb-2fac-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
3)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
4)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x18f4
Start time of application with error: 0x01d1c3b7965b295b
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d929ff23-2fab-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
5)
Can not find the description of event ID 100 from source MySQL. The part that the event has started may not be installed on the local computer, or the installation is damaged. You can install or repair the component on the local computer.
If the event is coming from a different computer, the display information had to be stored at the event.
The following information is included in the event:
InnoDB: File \ ibdata1:. "Windows aio 'returned OS error 1210. Can not continuous operation
the message resource is present but the message can not be found in the string / message table
6)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
7)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x1bfc
Start time of application with error: 0x01d1c3b70bc86bdc
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d34a0851-2faa-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
8)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
9)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0xc9c
Start time of application with error: 0x01d1c3b4173f350b
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report Id: 8176332b-2fa8-11e6-bfd3-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
I have an orange wamp icon.
mysql is running, but apache not
I have several errors in the windows application log files.
I had them before and rebooted.
now I see the same kind of errors:
1)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
2)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0x1a84
Start time of application with error: 0x01d1c3b8d13c31f6
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report ID: 501a41fb-2fac-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
3)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. Program Apache HTTP Server was shut down due to this error.
Program: Apache HTTP Server
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
4)
Name of application with error: httpd.exe, version 2.4.9.0, time stamp: 0x532585f0
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x18f4
Start time of application with error: 0x01d1c3b7965b295b
Path to application with error: I: \ wamp \ bin \ apache \ apache2.4.9 \ bin \ httpd.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d929ff23-2fab-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
5)
Can not find the description of event ID 100 from source MySQL. The part that the event has started may not be installed on the local computer, or the installation is damaged. You can install or repair the component on the local computer.
If the event is coming from a different computer, the display information had to be stored at the event.
The following information is included in the event:
InnoDB: File \ ibdata1:. "Windows aio 'returned OS error 1210. Can not continuous operation
the message resource is present but the message can not be found in the string / message table
6)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
7)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: php_imap.dll, Version: 5.5.12.0, timestamp: 0x5361414c
Exception code: 0xc0000006
Margin of error: 0x000147a0
ID of process error: 0x1bfc
Start time of application with error: 0x01d1c3b70bc86bdc
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_imap.dll
Report ID: d34a0851-2faa-11e6-bfd4-d43d7e6cc719
Full package name with error:
Relative application ID packet with error:
8)
Can not access file I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll for one of the following reasons: There is a problem with the network, with the disk where the file is stored with the storage drivers on this computer, or the disk is missing. CLI program ended because of this error.
Program: CLI
File: I: \ wamp \ bin \ php \ php5.5.12 \ ext \ php_intl.dll
The error value is displayed in the section Additional information.
user Action
1. Open the file again. This may be a temporary problem that will resolve itself when the program is run.
2. If access to the file is still not possible and
- If the file is in the network, the network administrator must verify that there is no problem with the network and connect to the server can be made.
- If the file is on a removable disk such as a floppy disk or CD-ROM, you should check whether this disc is properly inserted into the drive.
3. Check and repair the file with CHKDSK. Click on Start, Run and type CMD. Click OK and type CHKDSK / F at the command prompt. then press ENTER.
4. If the problem persists, you must restore the file from a backup medium.
5. Determine whether other files can be opened on the same disk. If not, the disk is damaged. If it is a hard disk, contact your network administrator or hardware vendor for support.
Additional information
Error value: C00000B5
Type drive: 2
9)
Name of application with error: php win.exe, Version: 5.5.12.0, timestamp: 0x53613fd9
Name of module error: ntdll.dll, version 6.3.9600.18233, time stamp: 0x56bb4e1d
Exception code: 0xc0000006
Margin of error: 0x00057241
ID of process error: 0xc9c
Start time of application with error: 0x01d1c3b4173f350b
Path to application with error: I: \ wamp \ bin \ php \ php5.5.12 \ php win.exe
Path to module error: C: \ WINDOWS \ SYSTEM32 \ ntdll.dll
Report Id: 8176332b-2fa8-11e6-bfd3-d43d7e6cc719
Full package name with error:
Relative application ID packet with error: